The staff of the Quality Supervision Bureau reminded consumers that when choosing LED lighting products, it is best to choose formal channels to buy products from trusted brand companies. In addition, consumers are better to choose 3C certified products and avoid buying "three noes" products. At the same time, consumers should pay attention to the following points when purchasing, using and maintaining LED lamps:

1. When choosing LED lamps and lanterns, you should “see three times”. Look at whether the product identification is complete, there should be the name of the manufacturer, address, trademark, model specification, rated voltage, rated frequency, rated power, etc., and check whether the product model matches the model specifications of the inspection report and safety certification certificate, and whether the power parameters are The identification is correct; secondly, whether the power cord of the lamp has the CCC safety certification mark, and the cross-sectional area of ​​the external wire should not be less than 0.75 mm2; thirdly, whether the charged body of the lamp is exposed, and the light source should not be able to touch the charged metal lamp cap after the light source is installed in the lamp holder.

2. Pay attention to the purchase of LED table lamps for children. Avoid buying metal shell desk lamps with high light source heat, such as incandescent lamps and tungsten halogen lamps; at the same time, pay attention to whether the lamp is stable enough, you can tilt the lamp about 6° to see if it falls over; choose anti-shock protection Table lamps with a higher category, such as category II lamps marked with a "back" symbol.

3. Install and use after reading the manual. After buying back the lamp, you should carefully check the marking of the lamp and read the instruction manual before installing and using it; when using LED lamps, if you find that the two ends of the fluorescent tube are red and the tube does not light up, you must follow the light source parameters of the mark and promptly Replace the aging lamp tube; when cleaning and maintaining the LED lamp, you should pay attention to the manual. Except for removing the lamp cover to clean the lamp cavity or replacing the lamp tube, do not easily disassemble other parts of the lamp, and install the lamp as it is after cleaning and maintenance.